A-Joint Traffic

A-JOINT^® TRAFFIC  is a heavy-duty paving grout specially developed for public areas. It is designed for traffic loads of up to 40 t, is sweeper-suction machine resistant and at the same time frost and de-icing salt resistant.

Due to its high flowability and self-compacting properties, A-JOINT^® TRAFFIC can be used for joints as small as 5 mm. Due to its fast curing, the grouted surface can be walked on after only 6 hours and driven on after 24 hours. A-JOINT^® TRAFFIC can be used universally for everything from new jointing to the renovation of existing surfaces, reducing maintenance costs and the risk of accidents caused by loose stones.

A-JOINT^® TRAFFIC is particularly suitable for highly frequented squares, public roads and paths as well as for use in paved street gutters.

 

Important Information:

Resin film: After grouting with A-JOINT^® TRAFFIC a thin resin film remains on the stone surface, which intensifies the stone colour and protects the stone from dirt. This resin film usually disappears over time due to weathering and use of the surface. If in doubt, create a small test area. The synthetic resin film is not a design defect, as neither the quality nor the functionality of the joint is affected.

Application notes: Use A-JOINT^® TRAFFIC only with a stable, load-bearing and permanently water-permeable substructure or a slope of at least 2%. The application is only recommended in well ventilated areas. Please wear adequate protective clothing. Tools should be cleaned with water during and after application.

Regularly remove dirt, leaves and moss from the joint surface. 

All fillers are natural products and are subject to natural colour variations. Our information is based on years of experience and the current state of the art, but is non-binding and does not constitute a contractual legal relationship.